SDC-25

SDC-252017-09-21T23:07:45+00:00

Project Description

SDC-25 “3D” LED Projection System

Single Chip DLP® With Advanced LED Light Engine

Imagine years of 2D and 3D viewing excellence and never having to endure a fading image, or change out a projector lamp! The Wolf Cinema SDC-25 “lamp-less” home cinema projector and cutting-edge ProScaler MK II video processor provide some of today’s most advanced imaging performances, available anywhere and at any price.

The projector’s light engine and precision optics deliver razor sharp images via its single 1920 x 1080 (1080p) DLP chip set from Texas Instruments. But unlike most other single-chip projection platforms, the SDC-25 has eliminated the traditional UHP lamp and color wheel: this projector produces an image via three separate RGB (red, green, blue) high-current light emitting diodes (LEDs). These LED emitter panels are superbly efficient light sources, with an extremely wide color gamut that exceeds today’s HD standards by 20%. There’s no color wheel involved and thus no visible “rainbow” artifacts or light flicker. And best of all is the extended life of the LED panels: a typical UHP projector lamp must be replaced and recalibrated every 2000-3000 hours or so. The SDC-25’s LED panels are rated to deliver accurate light output for approximately 20,000 hours of continuous use (normal mode). The RGB emitter technology is thus designed to deliver year after year of trouble-free viewing excellence, on screens as large as 12-ft wide.

This 2D/3D ensemble comes with our all-new ProScaler MK II external video processor – a rack-mountable video processor that delivers the ultimate in image fidelity, calibration accuracy and operational flexibility. The ProScaler MK II boasts multiple analog and digital video inputs for ease of component source selection, while incorporating numerous HD imaging advances: the remarkable Darbee™ Visual Presence (DVP™) technology for enhanced edge detail, ultra-deep contrast performance and improved visual depth-of-field; an advanced CMS control suite for precise color accuracy; and last but not least, our latest technology wizardry known as E-VariScope™ – the ability to quickly select desired aspect ratios when enjoying popular TV and film content on constant height, 2.35:1 wide CinemaScope® aspect ratio screens – and all without the need for an external anamorphic lens (full anamorphic lens support is also provided).

The result? A stunningly-bright image with breathtaking color renditions, deep black level performances and razor-sharp edge detail. The SDC-25 is yet another exciting high-performance home cinema projection solution from Wolf Cinema.

  • Advanced next-generation 1920 x 1080 [HD] DLP® light engine
  • “Lamp-less” LED technology achieves ~20% expanded color gamut and extremely accurate color balance
  • 1,300 ANSI peak white [calibrated], 500,000:1 native CR performance
  • Emitter life: 20,000 hours (normal mode)
  • E-VariScopeTM for 2.35:1 viewing on constant height screens (no anamorphic lens required)
  • Darbee® Video Presence [DVP] Imaging Technologies
  • Extended long throw optics (1.5-2.89:1) with ample H+V lens shift
  • Extensive CMS (Color management software)
  • Projector boasts dual HDMI 1.4a inputs, Component, Composite and PC inputs
  • ProScaler features 8 HDMI 1.4a inputs, 4 analog video inputs, 6 audio inputs, 2 HDMI outputs
  • Two optional VariScope™ FX™ (fixed) anamorphic lens kits
  • RS-232 connectivity for home automation systems
  • Ultra-quiet chassis design – ~25dB SPL @ 1 meter [normal mode]
  • RF-based 3D emitter and four (4) sets of active LCD 3D glasses included
  • Optional ceiling bracket – model WC-PM-MS

SDC-25

Display Technology Advanced HD 1080p (1920 x 1080), DLP® imaging technology by Texas Instruments
Brightness 1300 ANSI lumens (calibrated)
Contrast Ratio 500,000:1
Motorized Zoom Lens 1.5-2.89:1 HD Lens
Lens Offsets Vertical: +/- 60, Horizontal: +/-10%
Lamp technology Three RGB LED emission panels
Emitter Lifespan 20,000 hours (typical, normal mode)
Noise Levels 25 dB (normal mode)
Video Inputs Primary Inputs: HDMI x 2 (1.4a 2D/3D), PC (1), Component (1), Composite (1)
Signals NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4.43MHz SECAM B/D/G/K/K1/L, 4.25/4.4MHz, 480i/p, 576i/p, 720p (50/60Hz), 1080i (50/60Hz), 1080p (50/60Hz)
Control IR; RS-232 (serial input – Dsub-9)
Outputs 12V triggers (2), 3D Sync (1)
Power Requirements AC 110V-220V 50/60Hz
Power Consumption 375W (standby <0.5W)
Dimensions (WxHxD) 14″ x 6.4″ x 17.4″ (345 x 161.5 x 443 mm) (inc. feet)
Weight 15.4lb (7kg)

 

ProScaler MK II Video Processor

Inputs/Outputs 10 video inputs (8x HDMI 1.4a, 2 Component, 2 Composite), plus 2x HDMI 1.4a video outputs 14 audio inputs (8x HDMI, 2 analog stereo, 1 optical, 3 digital COAX), plus 1 digital COAX audio output
Video Processing 10 bit scaling, 729 point (9 x 9 x 9) gamut correction, upgradable to 17x17x17 Advanced filtering, MPEG mosquito noise, block artifact reduction, Temporal noise reduction for SD/HD sources; multiple configuration memories per input, DarbeeTM Visual Presence (DVPTM) technology
E-VariScope™ Enables 2.35:1 viewing on constant height screens (no anamorphic lens required)
Rack Mountable Rack mounting ears included
Control IR; RS-232 (serial Input – Dsub-9 x1), Wired IR format command input
Power Requirements Universal 110V-240V, 50/60Hz power supply included, output 12.0 VDC, 5.0A
Power Consumption 25 Watts
Dimensions (WxHxD) 17″ x 2″ x 9.5″ (1.75″H without feet) (431.8 x 50.8 x 241.3 mm)
Weight 11lb (5kg)