DLD-280 FD

DLD-280 FD2017-09-21T23:08:17+00:00

Project Description

DLD-280FD Laser DLP® Projector

Introducing Wolf Cinema’s DLD-280FD breakthrough DLP® home cinema projector – featuring our remarkable new BluHD™ Laser phosphor illumination technology for up to 20,000 hours of imaging excellence!

Enjoy years of trouble-free performance without ever having to change out a lamp, or recalibrate your system due to lamp changes over time. Our BluHD technology uses a high-output blue laser as the primary light source, generating the three R-G-B primary colors by first shining onto a special phosphor wheel, which when spinning creates yellow light. The yellow light is broken down further into red and green primaries, which together with the diffused blue laser light is directed onto an ultra-fast Texas Instruments DLP® HD chip set – then fired through the optics and onto your projection screen. The DLD-280FD system produces 5000 ANSI peak white performance – a terrific high-powered solution for large dedicated home cinema screens, or for those more challenging higher-ambient lighting room conditions. Four primary optics choices permit placement up to and well beyond 5X screen width, and is eminently suitable on screens up to 16-ft (~5 meters) in width.

The slim-line, rack-mountable Wolf Cinema ProScaler MK III video processor serves as the advanced signal processing nexus for your video system. The processor renders all current SD and HD sources with absolute precision, minimizing motion lag or undesired visual artifacts.

The ProScaler MK III boasts an advanced CMS calibration suite for accurate renderings, no matter the source – enabling professionals and enthusiasts everywhere to achieve excellent color accuracy and ultra-wide contrast levels in all viewing modes. Standard definition sources (such as from DVDs and television broadcasts) are up-converted and displayed with improved visual depth, dimension, and reality. Per-pixel video de-interlacing, 10 bit video processing, MPEG mosquito / temporal and block artifact noise reduction provide vast improvements on marginal HD and SD sources. Dual HDMI 1.4a inputs and a single HDMI 1.4a output provider connectivity to the laser projector head.

The ProScaler MK III also boasts our popular technology known as E-VariScope™: quick access to viewing modes when enjoying popular TV and film content on constant height, 2.35:1 wide aspect ratio screens. E-VariScope brings you that immersive 2:35:1 CinemaScope™ widescreen experience while eliminating those unwanted top & bottom “black bars,” as commonly experienced on smaller-width 16/9 screens – and all without the need for an external anamorphic lens (yet full anamorphic lens support is also provided).

  • BluHD™ Laser phosphor illumination technology for imaging excellence and long-term reliability (~20,000 hours)
  • Latest-generation single 0.65” DLP® technology by Texas Instruments™ (HD 1920 x 1080 resolution)
  • 5000 ANSI peak white, ~2,000:1 native CR performance
  • Choice of four primary motorized optics (> 5X screen width)
  • Ample H+V offset capabilities (+/- 120% Vertical, +/- 30% Horizontal)
  • Factory hand-calibrated for viewing excellence
  • ProScaler MK III Video inputs – 2 HDMI (SD/HD 1.4a), one HDMI 1.4a video output
  • Advanced 10-bit video processing, multiple calibration memories per input
  • E- VariScope™ technology for 2.35:1 film widescreen viewing on constant height screens (no anamorphic lens required)
  • Three optional cinema-grade VariScope anamorphic lens assemblies (two fixed, one motorized)
  • IR remote control included plus RS-232 system control capabilities
  • Optional WC-PM-MS ceiling mount assembly

DLD-280FD Laser HD Projection System

Display Technology Advanced HD 1080p (1920 x 1080), DLP® imaging technology by Texas Instruments™
Illumination BluHD™ laser, ~20,000 hours (eco mode), 24/7 capabilities
Performance 5000 ANSI lumens, ~2,000:1 native contrast ratio
Noise Levels 34dB SPL (eco mode), 38 dB SPL (normal)
Inputs/Outputs 1 HDMI 1.4a, 1 DVI-D, 1 DisplayPort, 1 DB-15 [VGA] in/out, 1 Composite Video, 1 S-Video, 1 Component Video (Y/Pb/Pr), 2 USB (one each type A and B), RJ-45 RS-232
Signals NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4.43MHz SECAM B/D/G/K/K1/L, 4.25/4.4MHz, 480i/p, 576i/p, 720p (50/60Hz), 1080i (50/60Hz), 1080p (50/60Hz)
Offsets +/-120% vertical, +/-30% horizontal
Motorized Optics 0.95-1.20:1 Zoom, 1.25-1.50:1 Zoom
1.55-2.90:1 Zoom, 2.90-5.45:1 Zoom
Control IR; RS-232 (serial input – D sub-9), Ethernet (10/100) RJ-45
Power Requirements AC 110V-240V 50/60Hz
Power Consumption 520W (340W eco mode)
Dimensions (WxHxD) 18.4” x 7.5” x 19.9” (467 x 191 x 506 mm)
Weight 35 lb (15.9kg)

ProScaler MK III Video Processor

Inputs/Outputs 2 HDMI 1.4a, 1 HDMI video outputs
Video Processing 10 bit scaling, 125 point (5x5x5) gamut correction
Advanced filtering, MPEG mosquito noise, block artifact reduction,
Temporal noise reduction for SD/HD sources; multiple configuration memories per input
E-VariScope™ Enables 2.35:1 viewing on constant height screens (no anamorphic lens required)
Rack Mountable Rack mounting ears included
Control IR; RS-232 (serial input – D sub-9), Wired IR format command input
Power Requirements Universal 110V-240V, 50/60Hz power supply included, output 5.0 VDC, 4.0A
Power consumption 13 Watts
Dimensions (WxHxD) 17” x 2” x 9.5” (1.75”H without feet) (431.8 x 50.8 x 241.3 mm)
Weight 7 lb (3.6kg)